TINSIL GEL 10 is a pourable, condensation-curing two component silicone rubber that cures at room temperature.
Recommended for:Animatronics, SFX skins and parts, Creature suits and Simulated skin/flesh
Potlife & Demould: Work time – 45 min / Demould time – 16 hrs (Full Cure after 48 hrs)
Hardness & Type: Shore A 10 (approx), 10,000cps
Due to the excellent mechanical properties of the cured rubber, TINSIL GEL-10 is especially suitable for reproducing models with very large undercuts in casting resins such as polyurethane, epoxy and polyester. It is the best choice for producing moulds for delicate parts. Other materials such as wax and plaster may be cast without any problems in moulds made from TINSIL GEL-10.
TINSIL GEL-10 can be mixed with Sil-Thix thickener for a brush-on layer.
Pourable, condensation-curing, two component silicone rubber that cures at room temperature and features:
• Excellent Flow
• Low Shore A Hardness (approx 10)
• High Tear Strength
• Fantastic extensibility and elasticity
• Accurate detail reproduction.
• Excellent choice for animatronics & special effects skins and parts
• Excellent long term stability of the mechanical properties of the cured rubber • Suitable for most casting resins, plaster and waxes.
• Excellent for use with Sil-Thix Thickener for brush-up moulding