Sell Here
4TUDMR2776N 4TUDMR2776 CLUTCH KIT 4T NISSAN Navara D40 2.5 Ltr 2.5L TDI YD25DDTI 5/2010-4/2015 4TERRAIN 4WD HEAVY DUTY FREE SHIPPING*PBR Ci INSPEK R2776N R2776
4TUDMR2776N 4TUDMR2776 CLUTCH KIT 4T NISSAN Navara D40 2.5 Ltr 2.5L TDI YD25DDTI 5/2010-4/2015 4TERRAIN 4WD HEAVY DUTY FREE SHIPPING*PBR Ci INSPEK R2776N R2776
4TDMR2776NHD 4TDMR2776N 4TUDMR2776N
Ci PBR INSPEK CLUTCH KITS
$1,168.73
Enter your e-mail address to be notified when product is in stock
Notify Me!
Seller Info
brettstruck1 (38796)
Seller Accepts
Shipping Policy
Orders are generally dispatched the following business day. Standard shipping times are usually 1-3 business days for domestic and 1-5 days for international.
Return Policy
Returns are not accepted
Ask Seller a Question
Report Seller
Description
 FREE SHIPPING*
CONDITIONS APPLY
FREE DELIEVERY IS AVAILABLE
BY COURIER ONLY
SO DELIEVERY WILL BE 1-7 DAYS
 BUSINESS HOURS
8.30AM-5.00PM
MONDAY-FRIDAY
YOU MUST BE ABLE TO SIGN FOR THE ITEM. 
AT BUSINESS ADDRESS
IF YOU WANT QUICKER OR BY POST
FREE SHIPPING IS NOT OFFERED
ITEM MAY NOT BE IN STOCK AT OUR WAREHOUSE (BERKELEY VALE)
AND MAY BE SHIPPED DIRECT FROM MANUFACTURE
******************************************

Clutch kit includes

  • Cover Assembly
  • Clutch Plate
  • Release Bearing 
    SOLID MASS FLYWHEEL SMF 

About the Manufacturer

This product is manufactured by Clutch Industries  Ci CI

With over 1 MILLION clutch kits sold, Clutch Industries (CI) is a full service clutch manufacturer, manufacturing clutch kits, clutch cover assemblies, clutch plates and flywheels. With more than 60 years of local design, development and manufacturing experience, they have become the largest and most experienced clutch manufacturer in Australia.  

******************************************
 
THIS 4TU KIT SET FOR PEAK TOQUE 

 Nm
 
NISSAN 
Navara D40 2.5 Ltr 2.5L TDI YD25DDTI  5/2010-4/2015
SPAIN BUILT ONLY 

KIT INCLUDES NEW
      REPLACES DUAL MASS Flywheel   
DUAL MASS TO SOLID FLYWHEEL CONVERSION 
FLYWHEEL, PRESSURE PALTE CLUTCH PLATE, THRUST BEARING
Clutch plate dimensions (mm): 275 x 24T x 255

EXTRAS

Spigot: RSB520

Align tool: CAT120

OR STANDARD
R2776N
MR2776N 
OR
DMR2776N
DMF2776N

NOW ALSO AVAILABLE
CLUTCH MASTER AND CLUTCH SLAVE CYLINDERS
CICM192
TBA
 
  • Parts starting with CICM indicate a master Cylinder.
  • Parts starting with CICS indicate a slave Cylinder.
  •  

ITS ALWAYS A GOOD IDEA TO CHECK PICTURE AS WELL (IF ACTUAL ITEM IS SHOWN)
SO AS TO RECEIVE THE CORRECT ITEM !!
 
******************************************
CLICK BELOW FOR LIST OF 4TU CLUTCH KITS


 

ALL 4TERRAIN PRODUCTS ENGINEERED TO THE HIGHEST STANDARD FEATURING:

feature icon

PATENTED GROOVED PRESSURE PLATE TO INCREASE TORQUE CAPACITY WHILE AIDING COOLING

feature icon

ANTI-BURST SG IRON PRESSURE PLATE, 300% STRONGER

feature icon

CLUTCH DISC RUN OUT SPECIFICATION <0/5MM FOR SMOOTH ENGAGEMENT

feature icon

RELEASE BEARINGS DYNAMICALLY TESTED TO 1,500,000 CYCLES AT 1800C

off-road logo

4TERRAIN HEAVY DUTY AND 4TERRAIN ULTIMATEFEATURE A PATENTED* ER²GROOVE DESIGN PRESSURE PLATE MADE FROM SPHEROIDAL GRAPHITE CASTING MATERIAL WITH A YIELD STRENGTH SOME 300% HIGHER THAN STANDARD CASTINGS. THE GROOVED DESIGN IMPROVES HEAT DISPERSION WHILE ALSO INCREASING THE TORQUE CAPACITY.
 

4Terrain Genuine 4x4 Engineering

When your in the middle of nowhere on a 38o slope, edging over the rock on the left and the wash on the right, you need to know that the clutch is engineered specifically for the unique demands of 4x4 applications.

4Terrain Clutch Kits are a strong, durable and tough clutch while still retaining the fine modulation and accurate pedal feel required for navigating difficult terrain. Features engineered specifically for 4x4 applications include:

High Capacity Cover Assembly – Higher Torque capacity is achieved by the use of components designed to provide the strength, thermal properties and durability required to increase torque capacity and reduce slipping over a wider temperature range.
Spheroidal Graphite Pressure Plate Casting - Sometimes referred to as Anti Burst, dartel or nodular iron, this material provides approximately four times the burst strength of a standard cover assembly pressure plate. This increased strength not only extends the life of the casting but combined with its improved heat dissipation, allows the clutch to run cooler in extreme situations.
 

Off Road Clutch Plate – Engineered specifically for the unique environment this design includes features unavailable elsewhere.

  • Two stage friction material
  • Optimised point load characteristics
  • Premium Grade Friction Material
  • High Capacity Clutch Plate Hub
   

The combined effect of the High Capacity Cover Assembly with Spheroidal Graphite Casting and the Off Road Clutch Plate provides a rugged, strong clutch system that retains the characteristics required for driver control and comfort.
 


******************************************
CI New Kits
Designed and manufactured to replace the clutch system installed as Original Equipment,
reliable is the term which best describes the CI standard replacement kits.
Each component has been thoroughly tested and developed by
CI for specific field applications within the Australian and New Zealand market place.
This range provides a Quality Assured replacement part that
will meet or exceed the requirements of an original vehicle. And after 60 years of experience in
developing and supplying clutch kits to the automotive aftermarket and OEM customer base,
we are well placed to provide Clutch Kits best suited to your region.
In fact, in many cases we were the Manufacturer of the Original Equipment part.
 
Reviews (0)
Currently there are no reviews for this product.
Add Review
Questions
Currently there are no questions for this product.
Ask Question
See more products from this seller
<< Previous | Next >>
© Copyright Ashop Commerce – All Rights Reserved
<-- Digital window verification 001 -->